|
|
Round Ball 7/8" Silicone Soap Mold 1803 |
|
|
|
 |
Additional
Information |
|
Directions &
Ingredients |
|
SDS &
Documents |
|
|
Create small soap balls with this silicone soap mold. Embed these cute soaps into a loaf or larger bar mold for a creative and unique soap design. These small soaps can also be used as single use bars for the gym!
Common Uses:
Melt & Pour Soap (MP). Cold Process Soap (CP). Cold Process Oven Process Soap (CPOP). Hot Process Soap (HP). Lotion Bars.
Points of Interest:
Maximum Temperature: 500ºF
Manufacturer: Crafter’s Choice®
Material: Silicone
Country of Origin: China
Country Of Origin: China
|  | This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a). |
|
|
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Solid Lotion: Pour melted lotion mixture into mold cavities. Allow mixture to solidify. Carefully remove solid lotion from mold by gently pulling the sides away from the solid lotion, and then push on the bottom of the mold until the solid lotion starts to release. Grab hold of solid lotion and carefully pull out of mold.
Care:
Hand wash in warm sudsy water.
| Average Customer Rating: |
 |
(82 Reviews) |
|
Victoria • New Jersey
Date Submitted: 07/20/2019
I Recommend This Product!
|
|
"Awesome" |
|
COMMENTS: Excellent, excellent quality, strong yet so easy to unmold the balls
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
CONNIE • Florida
Date Submitted: 06/01/2019
I Recommend This Product!
|
|
"Great round mold" |
|
COMMENTS: I bought this to make the balls to go on top of my loaves of soap.I ordered a couple elsewhere but it only makes 9 so this will help make more at one time.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Great quality
• Soap comes out easily
|
|
|
|
|
|
Nadine • Pennsylvania
Date Submitted: 03/09/2019
I Recommend This Product!
|
|
"I love it!" |
|
COMMENTS: I was skeptical about this, but it really produces the cutest little balls!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything!
|
|
• Nothing at all!
|
|
|
|
leticia • Pennsylvania
Date Submitted: 01/06/2019
I Recommend This Product!
|
|
"round ball 7/8" |
|
COMMENTS: Love it i can make gum ball for my soap definitely getting another one to speed the process up one mold is not fast enough
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
patti • Pennsylvania
Date Submitted: 03/16/2018
I Recommend This Product!
|
|
"LOVED IT" |
|
COMMENTS: Now I can make perfect round balls
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Jennifer • Minnesota
Date Submitted: 02/26/2018
I Recommend This Product!
|
|
"Perfect gumball size" |
|
COMMENTS: I used these as embeds for my gumball soap. Perfect size and the mold is very nice and easy to release the soap.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Scarlet • Michigan
Date Submitted: 02/22/2018
I Recommend This Product!
|
|
"Round ball 7/8" Silicone Soap Mold" |
|
COMMENTS: Perfect!!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Ginger • Kentucky
Date Submitted: 02/06/2018
I Recommend This Product!
|
|
"Mold" |
|
COMMENTS: Great
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
CessMThorson • West Virginia
Date Submitted: 09/20/2017
I Recommend This Product!
|
|
"Works Great!" |
|
COMMENTS: This makes the perfect size soap balls for embeds on top and inside of soap. This works for cold process soap as well as melt and pour. I just greased the inside of the molds with a little olive oil and left the CP in for about three days and then they came out with gentle pressure and little dents. Also a great price for as many embeds as it makes at a time.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Versatility
• Price
• Size of Embeds
|
|
• Nothing!
|
|
|
|
Shelby • Maryland
Date Submitted: 09/04/2017
I Recommend This Product!
|
|
"Perfect!" |
|
COMMENTS: This mold is the perfect size for embeds on top of Soap Cupcakes and for embeds on top of my soap bars. So happy with this purchase I will be purchasing again!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Margaret • Arizona
Date Submitted: 08/31/2017
I Recommend This Product!
|
|
"Love this mold!" |
|
COMMENTS: I make cute little soap gumball decorations with this mold and I love it! I use cold process soap in this mold most often, but it works great with melt and pour too. I like that it makes a lot of toppers in one mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Large number of cavities
• Easy to use and clean
|
|
• Nothing!
|
|
|
|
Felicia • North Carolina
Date Submitted: 08/06/2017
I Recommend This Product!
|
|
"Perfect every time!" |
|
COMMENTS: I love this mold! My soap balls come out perfectly every time!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• high quality
• works perfectly every time
|
|
• nothing
|
|
|
|
Deborah • New Jersey
Date Submitted: 08/04/2017
I Recommend This Product!
|
|
"Perfect shape" |
|
COMMENTS: Makes such nice balls to decorate tops of soap. I made balls with melt and pour soap base.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Sherry • Florida
Date Submitted: 07/20/2017
I Recommend This Product!
|
|
"Yaaaay!" |
|
COMMENTS: Perfect for when I have a little batter left over. Very cute!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Lisa • North Carolina
Date Submitted: 06/28/2017
I Recommend This Product!
|
|
"Love this mold" |
|
COMMENTS: Makes what I would consider a perfect sized gum ball..will also be really cute for Christmas soaps to make ornaments..just got to figure out how to achieve the look I want to get.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Tracy • Pennsylvania
Date Submitted: 06/25/2017
I Recommend This Product!
|
|
"Great for creating small balls" |
|
COMMENTS: This mold is great for creating small balls. So far, I've used it for embeds for cold process soap and to create melt & pour gum balls for bubble gum soap. Releases easily.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• sturdy
• releases easily
|
|
|
|
|
|
Teressa • Tennessee
Date Submitted: 06/05/2017
I Recommend This Product!
|
|
"round ball 7/8 inch" |
|
COMMENTS: this worked great! it was my first time using one of these and they are so cute, cant wait to use as Embeds!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Sindy • Georgia
Date Submitted: 03/03/2017
I Recommend This Product!
|
|
"Round Ball 7/8 Silicone Mold" |
|
COMMENTS: AWESOME easy to remove the balls, perfect size
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Lisa • Florida
Date Submitted: 02/17/2017
I Recommend This Product!
|
|
"Perfect cherries!!" |
|
COMMENTS: Originally, I bought this mold to make cherries with M&P base to top off CP soap cupcakes. But so far, I used this mold when I melted down 4 lbs of beeswax I got in a block format, and this size is perfect for measuring out the beeswax. It never stained, and even (normally) sticky beeswax came out shiny little cherries.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Theresa • Tennessee
Date Submitted: 01/26/2017
I Recommend This Product!
|
|
"Tiny little things" |
|
COMMENTS: But so cute when unmolded!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything
|
|
• Nothing
|
|
|
|
Etosha • Georgia
Date Submitted: 01/18/2017
I Recommend This Product!
|
|
"ballllllllllllllllls" |
|
COMMENTS: This was CUTE add! BALLS!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
rex • California
Date Submitted: 12/30/2016
I Recommend This Product!
|
|
"Nice for embeds!" |
|
COMMENTS: I really like this mold, it's perfect for making embeds to go inside soaps or pop the little balls on the top of a frosted soap!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• the price
|
|
|
|
Amanda • New Mexico
Date Submitted: 12/29/2016
I Recommend This Product!
|
|
"Great embeds " |
|
COMMENTS: Makes adorable imbeds. I use M&P and then top off my CP soaps with these little beauties. Everyone loves them.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Sara • Texas
Date Submitted: 12/29/2016
I Recommend This Product!
|
|
"Easy to use, quality product" |
|
COMMENTS: I love this ball mold. It's very easy to use, sturdy construction, and makes lovely ball toppers and embeds for CP and MP soap. I was originally concerned with how to get the soap out, but I place it in the freezer to firm up and then push on the bottom and pop the soap out of the mold. Super easy!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy construction
• Easy to use
|
|
|
|
|
|
April • Minnesota
Date Submitted: 12/25/2016
I Recommend This Product!
|
|
"Super fun mold!" |
|
COMMENTS: I love keeping this mold on hand when making melt and pour soaps. If there's any extra base, I can pour it into the little ball cavities. They cool quickly and are very easy to pop out of the mold. I save them till I have a sufficient number, then make a loaf soap with the little balls as embeds. The resulting sliced soaps are so much fun, with almost a Wonder Bread look.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Terri • Missouri
Date Submitted: 12/03/2016
I Recommend This Product!
|
|
"The Perfect Size" |
|
COMMENTS: I love this mold for my cupcake toppers. The ball is about the size of a nickel. Sturdy, yet flexible for ease of removal. Clean up is super easy.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Wendy • Wyoming
Date Submitted: 11/18/2016
I Recommend This Product!
|
|
"Great Mold!!" |
|
COMMENTS: I really like this mold. Easy to fill and they pop right out.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Elena • New Jersey
Date Submitted: 11/13/2016
I Recommend This Product!
|
|
"Round ball mold" |
|
COMMENTS: This is an excellent mold.This is one of those molds that I use very often. The round balls are the perfect size. They fit perfectly on a 1" bar. I'm so pleased with this silicone mold that I had to buy a couple more!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• perfect size
|
|
• nothing
|
|
|
|
Kimberly • Georgia
Date Submitted: 11/03/2016
I Recommend This Product!
|
|
"Great mold" |
|
COMMENTS: Makes nice soap balls. Easy to remove from mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Jennifer • Maine
Date Submitted: 10/26/2016
I Recommend This Product!
|
|
"Love this mold!!!" |
|
COMMENTS: This mold is very useful! I made purple grapes, blueberries and gum balls and they turn out very well. So useful and fun!!!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Corynda • New York
Date Submitted: 10/09/2016
I Recommend This Product!
|
|
"7/8th Ball Embed Mold" |
|
COMMENTS: Love it. Easy to fill and makes the cutest little embeds. So far I have on used to top the piping on my cold process soap but will next use as a decoration in a loaf. They just pop right on out.....easy peasey! Will be trying more.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Ease
• Size
• Quality and price
|
|
|
|
|
|
Jamie • Ohio
Date Submitted: 09/29/2016
I Recommend This Product!
|
|
"Great mold, buy it!" |
|
COMMENTS: This is a cute little mold, perfect for embeds or embellishments on all kinds of soaps. I may have to buy a few more! Thank you.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
julie • Florida
Date Submitted: 09/06/2016
I Recommend This Product!
|
|
"Adorable" |
|
COMMENTS: These make the cutest little balls, perfect for making "cherries" to put on my soap cupcake frosting! They pop out of the mold with such ease, just make sure they have a couple of hours to harden first.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Samantha • New Mexico
Date Submitted: 08/26/2016
I Recommend This Product!
|
|
"Great!" |
|
COMMENTS: This is everything I expected. Nice and sturdy mold but easy to pop mp out.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
janice • Louisiana
Date Submitted: 08/06/2016
I Recommend This Product!
|
|
"GREAT! " |
|
COMMENTS: Great mold!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Allena • New York
Date Submitted: 07/17/2016
I Recommend This Product!
|
|
"A very good product to have for embeds" |
|
COMMENTS: I purchased this for soap embeds. They look great on top of soap loafs and even better on top up cupcake soaps. I recently made blueberry cupcake soap with white whipped frosting . This mold came in handy because I was able to make blue marbled effect blueberries to go on top of the cupcakes and they turned out great. So to reiterate this is a great mold for making a lot of balls in a short period of time and the material is very sturdy.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• It's very sturdy and easy to pop out
• I can make a lot
|
|
|
|
|
|
Cheryl • North Carolina
Date Submitted: 07/02/2016
I Recommend This Product!
|
|
"Makes great gum balls for the top of cp soap" |
|
COMMENTS: This mold is easy to use and is exactly what I needed to make balls for the top of my cp soap!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Michele • Virginia
Date Submitted: 04/12/2016
I Recommend This Product!
|
|
"Awesome Product" |
|
COMMENTS: This is a great mold. Makes the perfect round size for my needs. This mold is VERY sturdy.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Rona • Kansas
Date Submitted: 03/24/2016
I Recommend This Product!
|
|
"Couldn't wait to try!" |
|
COMMENTS: Just received my 7/8" silicone ball molds tonight, and just couldn't wait to give them a try. So at 10PM I was heating M&P soap to pour into my new molds. These molds have not disappointed me one bit! They are easy to fill, and even easier to unmold because of their flexibility. What could be easier.....nothing!!! Now I have perfectly round embellishments for my CP & HP soaps, no more rolling and trying to perfect the shapes and sizes of each hand rolled ball. Thank you, Thank you!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• ease of use
• flexibility of the mold
|
|
• nothing
|
|
|
|
Sarah • Idaho
Date Submitted: 03/19/2016
I Recommend This Product!
|
|
"Cute Results" |
|
COMMENTS: Adorable little soap balls. This would be easier if I'd used melt and pour but I don't like it. I did a water discount and added sodium lactate. Had to freeze the soap to get them to come out cleanly. Stilled loved the end results.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Clarice • Pennsylvania
Date Submitted: 03/10/2016
I Recommend This Product!
|
|
"Embeds" |
|
COMMENTS: It is a great mold for embeds. Easy to remove soaps
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Shirley • Idaho
Date Submitted: 02/22/2016
I Recommend This Product!
|
|
"Molds" |
|
COMMENTS: These round ball molds are awesome! The make great embeds.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Tabitha • Michigan
Date Submitted: 02/13/2016
I Recommend This Product!
|
 |
"So Cute!" |
|
COMMENTS: Love this mold and its pearl like size it does. I enjoy making them for single use soap. The material of the tray though does attract all kinds of things to stick to it which is slightly annoying.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
• shape
• style
|
|
|
|
|
|
Sara • Iowa
Date Submitted: 02/11/2016
I Recommend This Product!
|
|
"AWESOME!" |
|
COMMENTS: This is an awesome mold. Makes great imbeds for cupcakes or soap. Easy to unmold. LOVE IT!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Fran • Texas
Date Submitted: 02/03/2016
I Recommend This Product!
|
|
"super easy to unmold" |
|
COMMENTS: I have used this with both cold process and melt and pour.
Very easy to unmold with both types.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
David • Tennessee
Date Submitted: 01/19/2016
I Recommend This Product!
|
|
"Works great!" |
|
COMMENTS: I had only seen this mold used with MP. However, I had some leftover CP soap batter and thought I would give it a try. I was worried about how easily it would release from the mold. 24 hours after pouring I popped it into the freezer for 15 minutes or so and out the popped perfectly!!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
KellyAnn • Pennsylvania
Date Submitted: 01/16/2016
I Recommend This Product!
|
|
"Nice" |
|
COMMENTS: I had a mold like this that made 9 balls, but I had to make three batches to have enough embeds for my loaves. Now I can make all my embeds in one batch, so it's a great time-saver!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
julie • Utah
Date Submitted: 01/14/2016
I Recommend This Product!
|
|
"Versatile" |
|
COMMENTS: I love this mold. I have used it for embeds and single scrub balls. I find myself reaching for this again and again. I finally had to buy 2.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Eliska • Louisiana
Date Submitted: 12/30/2015
I Recommend This Product!
|
|
"Round Ball Silicone Mold" |
|
COMMENTS: Love polka dots and love this mold. I had a smaller ball mold and was constantly having to pour twice to have enough for my loaf. This mold is perfect as I have enough with one pouring to achieve my dots.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
susan • New Jersey
Date Submitted: 12/21/2015
I Recommend This Product!
|
|
"Great" |
|
COMMENTS: I love the quality of this mold and have used it several times already. The silicone is sturdy and easy to use. Soap pops out with no problem at all.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything
|
|
• Nothing
|
|
|
|
Joan • Delaware
Date Submitted: 12/08/2015
I Recommend This Product!
|
|
"Round ball 7/8 inch silucone soap mold" |
|
COMMENTS: This makes really cute little balls that I use for cherries on top of soap cupcakes. They are easy to unmold. The bottoms are flat which I like for on top of my loaf soaps.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
• Easy to unmold
|
|
• Nothing
|
|
|
|
Lindsay • Texas
Date Submitted: 12/07/2015
I Recommend This Product!
|
|
"Want soap gumballs? Here you go!" |
|
COMMENTS: Just like everyone else, I wanted to make the soap gumballs you see everyone making. This is perfect for making a bunch all at once! They pop out super easily with no denting.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Ronda • Ohio
Date Submitted: 11/22/2015
I Recommend This Product!
|
|
"LOVE this mold!!!!" |
|
COMMENTS: I know some people have complained because it's not a complete sphere, but I LOVED this!! Once I put the flatter side on top of the soaps, you cannot even tell. The come out beautifully!!! Looked great on top of the Christmas soaps I'll be giving away as presents.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
• Ease of unmolding the mp soap
• Looked wonderful
|
|
|
|
|
|
Cassandra • Pennsylvania
Date Submitted: 11/13/2015
I Recommend This Product!
|
|
"My new favorite mold!!" |
|
COMMENTS: I haven't stopped using this thing since it arrived at my door!! I just love everything I can do with it, from toppers to embeds. I can put it in the oven and have usable balls in a couple hours. I need about ten more of these things!! Wish the tray was bigger!!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• easy to clean
• versatile
|
|
• bigger tray with more balls
|
|
|
|
DORNE • Florida
Date Submitted: 10/25/2015
I Recommend This Product!
|
|
"very very good" |
|
COMMENTS: It produces round balls the size of a cherry which is exactly what I wanted. They come out very clean and the mold very easy to handle.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• everything about it
|
|
• nothing
|
|
|
|
Tosha • Utah
Date Submitted: 10/22/2015
I Recommend This Product!
|
|
"Makes great Balls" |
|
COMMENTS: These are fun they make great balls, first attempt was a bit rough. Then I discovered I needed to be able to squeeze the soap into them, went well looking forward to playing and creating more with this.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Flexibility of the mold
• made of Good material
|
|
|
|
|
|
Rachelle • Colorado
Date Submitted: 10/21/2015
I Recommend This Product!
|
|
"Pop out easily!" |
|
COMMENTS: I love these for creating candy look-a-like pieces for embeds in my CP. Everyone comments on how they look just like candy!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Very easy to pop out of the mold
|
|
|
|
|
|
Imani • California
Date Submitted: 09/17/2015
I Recommend This Product!
|
|
"Works like a charm" |
|
COMMENTS: I got this mold and made some MP embeds. The size was great for the detail that I needed. The balls comes out with a gentle push. Clean up is simple. Love this mold and the price is EXCELLENT!!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Rebecca • Minnesota
Date Submitted: 09/16/2015
I Recommend This Product!
|
|
"Great Product! " |
|
COMMENTS: In my soap line, I have a blueberry banana scented soap. To make it more interesting, I wanted to add what looked like actual blueberries to the bars. This mold was perfect! It is a little bigger than the average blueberry, but I didn't mind. The balls produced are a little smaller than a gumball. To fill the mold, I poured the soap into a funnel, which seemed to work well. After a few hours, the soap pops right out of the mold! No sticking. The mold is also relatively easy to clean. I definitely recommend this product.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• easy to use
• easy to clean
• good size
|
|
|
|
|
|
Angela • Georgia
Date Submitted: 08/26/2015
I Recommend This Product!
|
|
"Amazing mold!" |
|
COMMENTS: I absolutely love this mold. I received it today and immediately made a batch of melt and pour soap to fill it with. The soap balls are perfectly round and shiny. The release is super easy...just push the hardened balls up through the opening and they pop right out. Couldn't have have for a better round ball mold. Next I'll buy the larger sizes.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to use
• Easy release
• Perfect finish on product
|
|
• Add more cavities
|
|
|
|
Mary • Nevada
Date Submitted: 08/22/2015
I Recommend This Product!
|
|
"Round Ball 7/8" Mold" |
|
COMMENTS: This is a nice mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Marie • South Dakota
Date Submitted: 08/11/2015
I Recommend This Product!
|
|
"Makes perfect Balls" |
|
COMMENTS: This mold is excellent quality, easy to use and makes perfect balls. I used it with multiple colors of M&P to make gum balls. Used with gumball FO, it looks and smells perfect.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Great quality
• Easy to use
|
|
|
|
|
|
Debbie • Missouri
Date Submitted: 07/07/2015
I Recommend This Product!
|
|
"Great for Embeds" |
|
COMMENTS: This mold is easy to use. I use it to make balls of soap to embed in my bars of cp soap, giving them a polka dot effect when cut.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Home • Wisconsin
Date Submitted: 07/06/2015
I Recommend This Product!
|
|
"Small Ball Mold...awesome!" |
|
COMMENTS: I bought this mold to make M&P ball shaped soap for "cherries" for soap cupcakes. It makes many at once and is super easy to unmold...just pop the set ball out. Comes out perfectly formed. Easy clean up, too.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• easy to use
• great round shape
• easy clean up
|
|
• nothing
|
|
|
|
Katy • North Carolina
Date Submitted: 06/17/2015
I Recommend This Product!
|
|
"love this mold!" |
|
COMMENTS: this is a great mold and forms almost perfect spheres. the top is a little flat but its hardly noticeable when the soaps are used as embeds.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• makes tons of soap balls at once
• good price
|
|
|
|
|
|
Bun • Florida
Date Submitted: 06/01/2015
I Recommend This Product!
|
|
"Time Cutter! " |
|
COMMENTS: I love this mold. It has cut my time in half with all the balls I can make. Instead of other companies only have a few spots to pour this mold has many! Now I can make more using less time! Wonderful!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• A lot of balls
|
|
• None love it.
|
|
|
|
Carrie • Florida
Date Submitted: 05/13/2015
I Recommend This Product!
|
|
"Made the PERFECT cherry embeds!" |
|
COMMENTS: Made perfect cherries for the top if my birthday cake load soap! Very nice mold that's easy to work with. I can't wait to try it for other projects!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• High quality silicon
• makes great "cherry" embeds
|
|
• Price
|
|
|
|
Kirsten • Indiana
Date Submitted: 05/03/2015
I Recommend This Product!
|
|
"Yet another one of my very favorites!!" |
|
COMMENTS: This makes the most beautiful embeds. Whenever I am melt and pouring something else and have a little left over I add it to the sphere mold(spritz with alcohol first) and I now have a beautiful set of multi colored embeds.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• very well made
• versitile shape
• great deal
|
|
• I would have bought two
|
|
|
|
April • Mississippi
Date Submitted: 03/23/2015
I Recommend This Product!
|
|
"Fantastic smooth spheres for your soap!" |
|
COMMENTS: These will leave a tiny flat surface to prop your weight on or embed in the soap itself. A little dollop on this will round it out after drying. No problems! Pops out easily and smooth sleek surface! Great!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Silicon, easy care and clean
|
|
• Nothing!
|
|
|
|
Rosemarie • North Carolina
Date Submitted: 03/17/2015
I Recommend This Product!
|
|
"Round ball mold 7/8"" |
|
COMMENTS: I really like this mold. Easy to fill and they pop right out. Going to get the next size up!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to use
|
|
• nothingE
|
|
|
|
Agnes • New York
Date Submitted: 03/12/2015
I Recommend This Product!
|
|
"Easy to Unmold" |
|
COMMENTS: Makes the perfect sized M&P balls to mimic melon balls for my loaf soap. Silicone molds are my favorite type and this is no exception. Very easy to unmold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
sylvie • New Jersey
Date Submitted: 03/06/2015
I Recommend This Product!
|
|
"soap decorating" |
|
COMMENTS: I am very happy with this product. Design possibilities are endless.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
veronica • Texas
Date Submitted: 02/18/2015
I Recommend This Product!
|
|
"easy to use" |
|
COMMENTS: Love the mold. Used to make Bubble Gum soap. Worked out great. Easy release.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Castlegar • British Columbia
Date Submitted: 01/31/2015
I Recommend This Product!
|
|
"Thrilled" |
|
COMMENTS: I had bought ball molds from other sources, but ended up with 9 at a time... it took forever. Happy to find a mold that holds 27, for only a few dollars more. Great product, amazing quality. Will be buying more. Makes embeds
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• availability to make many at once
• Quality
• Price
|
|
|
|
|
|
YTS • Texas
Date Submitted: 01/29/2015
I Recommend This Product!
|
|
"I love them for inbeds" |
|
COMMENTS: I love them for embeds.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process, Soap - Shampoo Bars, Soap - Shave Shampoo
|
|
|
|
|
Diana • Pennsylvania
Date Submitted: 01/19/2015
I Recommend This Product!
|
|
"Five stars" |
|
COMMENTS: I love this mold!!! I paid a small fortune for my previous ball mold and there were fewer cavities. I love this for melt and pour embeds and they pop out effortlessly. I am going to get a few more!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Price
• Lots of cavities
|
|
• Nothing
|
|
|
|
Ashley • Minnesota
Date Submitted: 01/13/2015
I Recommend This Product!
|
|
"Round Ball 7/8" Silicone Soap Mold 1803" |
|
COMMENTS: I use this mold for small soap balls on my soap bars. I also use it for wax melts. Its perfect and absolutely love it! It's very easy to unmold which is of course great.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Kathryn • New Hampshire
Date Submitted: 12/28/2014
I Recommend This Product!
|
|
"Round Ball 7/8" Silicone Soap Mold" |
|
COMMENTS: When making melt and pour soaps in the shapes of flowers, I pour these small balls and use them as the center for the flower. Looks really nice when done!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Cassie • Massachusetts
Date Submitted: 11/25/2014
I Recommend This Product!
|
|
"So cute!" |
|
COMMENTS: This little soap tray is so cute! You get little balls with one flat edge. Maybe like a inch in diameter. The mp soap hardens pretty fast in these little trays because the amount of soap is so small. I think that these trays are great, and fun... If you are looking for little teeny soaps of course.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Ease of use
|
|
|
|
|
|
Anna • Virginia
Date Submitted: 10/02/2014
I Recommend This Product!
|
|
"Makes very cute rounds but..." |
|
COMMENTS: Pro's would be: It makes the cutest round soap balls. Easy unmolding & cleanup. Very durable.
Con's: I truly wish it was a full round ball. Instead of having a flat bottom.
Other than that i really like this mold!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Maria • New York
Date Submitted: 09/28/2014
I Recommend This Product!
|
|
"A must have for embeds" |
|
COMMENTS: This is a great mold perfect for embeds. Balls come out with ease. Love love love this mold. Would love to see this mold in other shapes.... Stars, hearts etc....
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Kenneth • New York
Date Submitted: 09/16/2014
I Recommend This Product!
|
|
"Excellent Mold" |
|
COMMENTS: This mold is great for melt and pour soap!! Highly recommend very easy to remove from mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Great for melt and pour
|
|
|
|
|
| Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
4 Question(s) Shown Below |
| Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
|
|
|
|
