|
|
Square Guest Silicone Mold 1609 |
|
|
|
 |
Additional
Information |
|
Directions &
Ingredients |
|
SDS &
Documents |
|
|
A guest sized soap mold is a must for soap makers. Use it for leftover soap batter, and then offer these as samples! This mold creates a small soap bar, which can be sold to hotels, or add some color to your small guest-sized soap and market them for children.
Common Uses:
Melt & Pour Soap. Cold & Hot Process Soap.
Points of Interest:
Material: Food Grade Silicone
Maximum Product Pour Temp: 500ºF
Makes (6) Individual Bars
Approximate Bar Weight: 1.8 oz
Measures: 2" x 2" x 0.75"
Bar is perfectly straight without rounded corners. Mold walls are built with extra thickness to prevent bowing.
Country Of Origin: China
|  | This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a). |
|
|
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cold process soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.
Care:
Hand wash in warm sudsy water.
| Average Customer Rating: |
 |
(30 Reviews) |
|
Beth • Virginia
Date Submitted: 04/21/2017
I Recommend This Product!
|
|
"Great for guest soaps" |
|
COMMENTS: This mold is great for making guest size soaps. The mold is sturdy. I used it with CP soap and it was very easy to unmold. I can tell this mold will last me for many more batches of soap making!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy CP soap release
• Sturdy construction
|
|
|
|
|
|
Elizabeth • Colorado
Date Submitted: 03/19/2017
I Recommend This Product!
|
|
"Be Squared" |
|
COMMENTS: I use these molds for my Sinus Shower Steamers. As they are shaped differently than my normal shower steamers, it allows me to clearly communicate to my customers that steamers in this particular shape are for "Showers Only" (my other steamers can double as bath fizzies). I find that my steamers in this mold are easier to pop-out than the circular shaped molds. I LOVE these!
|
|
PRODUCT USED IN: Bath Fizzies & Salts
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• easy to use
|
|
• nothing
|
|
|
|
DeShawn • Florida
Date Submitted: 01/18/2017
I Recommend This Product!
|
|
"Perfect for testing" |
|
COMMENTS: These are the perfect size for doing small test batches. Easy release for both glycerin and cold process.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
• durability
• easy release
|
|
• nothing
|
|
|
|
Sharon • South Carolina
Date Submitted: 01/10/2017
I Recommend This Product!
|
|
"use all the time" |
|
COMMENTS: We have three of these at our shop and we are looking to buy several more.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Agnes • New York
Date Submitted: 07/03/2016
I Recommend This Product!
|
|
"Nice mold" |
|
COMMENTS: Very nice and easy to use mold. Actual bars are slightly smaller than described. Worked well for a large custom order.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
lovetosoap • Utah
Date Submitted: 05/07/2016
I Recommend This Product!
|
|
"Perfect Size!" |
|
COMMENTS: I LOVE this cute little mold. It's a perfect size for guest and sample soaps.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Good quality
• Great sample soap size
• Great guest soap size
|
|
|
|
|
|
Pamela • Ohio
Date Submitted: 03/23/2016
I Recommend This Product!
|
|
"great mold" |
|
COMMENTS: Love using my molds. I can easily unmold my soaps
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Janice • New Jersey
Date Submitted: 03/13/2016
I Recommend This Product!
|
|
"Perfect" |
|
COMMENTS: Great little mold for left over soap. Dont have to waste any and the pieces can be used for samples.,the mold has an easy release.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
• Easy release
|
|
• None
|
|
|
|
Ashley • Pennsylvania
Date Submitted: 03/11/2016
I Recommend This Product!
|
|
"Square Guest Silicone Mold 1609 " |
|
COMMENTS: This mold makes the perfect sized lotion bars. Holds up well and releases perfectly... love them.
|
|
PRODUCT USED IN: Lotions, Creams & Butters
|
|
|
|
|
Angela • Arizona
Date Submitted: 01/07/2016
I Recommend This Product!
|
|
"Perfect!!!" |
|
COMMENTS: I recently used square soap mold for CP soap. The soap was a breeze to release and I love the petite size of each soap. I will be using them to hand out as samples.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Ease of release
• Size
|
|
|
|
|
|
Sue • Maryland
Date Submitted: 10/04/2015
I Recommend This Product!
|
|
"Love These Molds for Guest Soaps" |
|
COMMENTS: These are the perfect size for guest soaps! I just make mini-version of my full-sized bars with leftover MP, and customers love the little guest soaps!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• silicone is flexible
|
|
• more cavities - maybe 12
|
|
|
|
Lynne • New Mexico
Date Submitted: 08/09/2015
I Recommend This Product!
|
|
"Perfect size" |
|
COMMENTS: I love these guest molds. They're the perfect size for sample and test bars.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
|
|
• nothing
|
|
|
|
Katy • North Carolina
Date Submitted: 06/17/2015
I Recommend This Product!
|
|
"durable and easy to unmold soaps from" |
|
COMMENTS: i love the crafters choice molds and this one is no different. my soaps come out easily with a nice shine to them. great product!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
YTS • Texas
Date Submitted: 06/01/2015
I Recommend This Product!
|
|
"Great Molds! " |
|
COMMENTS: Great Molds! I absolutely love all the Crafters Choice molds. They last, don't bow, easy to clean, and even safe in the oven!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process, Soap - Shampoo Bars, Soap - Shave Shampoo, Lotion Bars & Sticks
|
|
|
|
|
jeffrey • Minnesota
Date Submitted: 03/27/2015
I Recommend This Product!
|
|
"Great product." |
|
COMMENTS: I would buy this again. Makes a nice small bar of soap.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to use
• Produces quality products
|
|
|
|
|
|
Sybella • Massachusetts
Date Submitted: 10/10/2014
I Recommend This Product!
|
|
"great mold!" |
|
COMMENTS: This is a great mold, makes clean perfect guest size soaps and kid soaps. I wish they had this in more sizes.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• quallity
• easy
• silicone
|
|
• more sizes
|
|
|
|
Kathy • Oklahoma
Date Submitted: 08/07/2014
I Recommend This Product!
|
|
"Great Size" |
|
COMMENTS: I use these for left over soap batter and then sell them as samples. I also plan to use them to make chocolate and vanilla soap sandwiches. I already had 1, but really wanted another one. Some people prefer this size to sit next to the sink.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Great Sample Size
|
|
• Nothing
|
|
|
|
Michelle • Ohio
Date Submitted: 07/01/2014
I Recommend This Product!
|
|
"Great Mold" |
|
COMMENTS: Works well and is the perfect sample/guest size soap.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Christa • Washington
Date Submitted: 06/20/2014
I Recommend This Product!
|
|
"Love this mold!" |
|
COMMENTS: I have found this mold great for multiple uses. I use it for guest soaps and also soap scrubs that I cut into cute little cubes. I have used it many many times and it has proven to be very durable. I am actually ordering another one right now so I can have two going at the same time.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Durability and Easy to us
|
|
• None
|
|
|
|
Binyomin • New Jersey
Date Submitted: 04/25/2014
I Recommend This Product!
|
 |
"Great! DURABLE!" |
|
COMMENTS: I like this mold. I've used it many times and it is still in good shape.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Mariluz • Florida
Date Submitted: 04/25/2014
I Recommend This Product!
|
|
"Great Form" |
|
COMMENTS: Perfect for my line
|
|
PRODUCT USED IN: Bath Fizzies & Salts
|
|
|
|
|
Melissa • Mississippi
Date Submitted: 04/20/2014
I Recommend This Product!
|
|
"Easy to Unmold" |
|
COMMENTS: I love these silicone molds. The MP soaps come out smooth and pretty. Works great when using embedded paper.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
PO Box 785 • Oklahoma
Date Submitted: 04/19/2014
I Recommend This Product!
|
|
"Love it" |
|
COMMENTS: First off Im a fan of anything silicone and this mold was exactly what I was looking for. Very sturdy, washes easily and is perfect cavity size.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Cavity Size
• Washes/holds up well
• Can be manhandled and holds up well.
|
|
• More cavities
|
|
|
|
Tabitha • Michigan
Date Submitted: 03/09/2014
I Recommend This Product!
|
|
"Perfect size!" |
|
COMMENTS: Love these silicone molds. Perfect size and so easy to use.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
andrea • Texas
Date Submitted: 03/08/2014
I Recommend This Product!
|
|
"Great molds" |
|
COMMENTS: Need to buy more. Love mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Great release
• Great price
• Need to buy more
|
|
|
|
|
|
Allison • Texas
Date Submitted: 11/03/2013
I Recommend This Product!
|
|
"Impressed " |
|
COMMENTS: I purchased these for a special order and bought 5. I am impressed with the thickness of the mold
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• thickness
• strong
|
|
• amount of compartments
• price
|
|
|
|
Reimus • Texas
Date Submitted: 10/10/2013
I Recommend This Product!
|
|
"Cool Size" |
|
COMMENTS: This is perfect to make samples and test out new recipes.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
• Durability
|
|
|
|
|
|
Stephanie • Idaho
Date Submitted: 08/05/2013
I Recommend This Product!
|
|
"Love It" |
|
COMMENTS: I purchased the larger size of this mold as well and I love them both. I really like the shape of the bars and how sharp the edges are. If you purchase this mold, you will love it too!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Shape
• Size
|
|
|
|
|
|
Katharine • Florida
Date Submitted: 07/22/2013
I Recommend This Product!
|
|
"Great" |
|
COMMENTS: Sturdy and soaps pop out very easily. Smaller size, great for guest soaps and trial sizes
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
silvia • New Hampshire
Date Submitted: 07/19/2013
I Recommend This Product!
|
|
"Great size!" |
|
COMMENTS: Whenever I make soap, I always make extra to give out as samples. This is a great size, and I have people asking to buy that size a lot. The soap comes out of the mold beautiful, with nice sharp corners.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
| Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
2 Question(s) Shown Below |
| Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
|
|
|
|
