|
|
Round Ball 2 1/4" Silicone Soap Mold 1801 |
|
|
|
 |
Additional
Information |
|
Directions &
Ingredients |
|
SDS &
Documents |
|
|
The large soap balls made from this soap mold can be used as a bar on their own or embedded into a loaf. Create creepy eyeball soap for Halloween, Holiday soap ornaments in December or fishing bobber soap for Father's Day.
Common Uses:
Melt & Pour Soap (MP). Cold Process Soap (CP). Cold Process Oven Process Soap (CPOP). Hot Process Soap (HP). Lotion Bars.
Points of Interest:
Maximum Temperature: 500ºF
Manufacturer: Crafter’s Choice®
Material: Silicone
Country of Origin: China
Country Of Origin: China
|  | This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a). |
|
|
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Solid Lotion: Pour melted lotion mixture into mold cavities. Allow mixture to solidify. Carefully remove solid lotion from mold by gently pulling the sides away from the solid lotion, and then push on the bottom of the mold until the solid lotion starts to release. Grab hold of solid lotion and carefully pull out of mold.
Care:
Hand wash in warm sudsy water.
| Average Customer Rating: |
 |
(13 Reviews) |
|
Ludmela • Maryland
Date Submitted: 01/01/2018
|
 |
"Oh my" |
|
COMMENTS: I was excited to get this and when I used it the melt and pour ran out of the mold all over the counter. I am going to have to use some kind of clips to bind the mold together if i want to use this again. Messy Messy
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Danielle • Pennsylvania
Date Submitted: 12/07/2017
I Recommend This Product!
|
|
"Awesome!" |
|
COMMENTS: These create really fun sized soaps! Daughter and I made them as a Christmas gift for classmates, and I'm confident that they're large enough so that a small child won't mistake it as candy.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Allison • Texas
Date Submitted: 11/28/2017
I Recommend This Product!
|
|
"nice mold" |
|
COMMENTS: works great to make the eyeball soap and candy apples. Large soap ball!!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
janet • Pennsylvania
Date Submitted: 02/05/2017
I Recommend This Product!
|
|
"Round Ball 2 1/4" Silicone Soap Mold 1801" |
|
COMMENTS: I love this mold. It doesn't seem as though it would be very versatile, but use your imagination... there are so many possibilities! I have used this mold for everything from Pokemon balls to suspending CP embeds in clear MP! It snaps together well, so nothing leaks once you have them together. The hole at the top is big enough to place small embeds after the lid is on, and to pour more MP to the top. Very sturdy, and well made!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Theresa • Tennessee
Date Submitted: 01/26/2017
I Recommend This Product!
|
|
"Great little mold!" |
|
COMMENTS: East to use and release
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything
|
|
• Nothing
|
|
|
|
Agnes • New York
Date Submitted: 09/14/2016
I Recommend This Product!
|
|
"Nice Mold!" |
|
COMMENTS: Worked great for creepy eyeball soap. Looking forward to using it to make Christmas ornament soap.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Karen • Texas
Date Submitted: 03/08/2016
I Recommend This Product!
|
|
"very cool!" |
|
COMMENTS: have used this to make lots of soaps - wish I could make it work with bath bombs :)
kids love the soaps made with this
lots of possibilities - endless ideas - loads of fun and so very easy to use
well... unless your hands shake like mine and you are trying to make the eyeballs! ugh! - not hard - just go slow and easy and remember... less is more on the black pupil. :)
have fun - these are great!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• quality
• endless posibilities
• customers love soaps made w/ it
|
|
• nothing
|
|
|
|
Veronica • Texas
Date Submitted: 10/06/2015
I Recommend This Product!
|
|
"perfect for snowball christmas soap theme" |
|
COMMENTS: used for soap in a rope. very easy .
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Sharon • Ohio
Date Submitted: 07/27/2015
I Recommend This Product!
|
|
"Wow" |
|
COMMENTS: I first ordered this thinking it would be much smaller (yea I know look at description). So once I received it I had no idea what to do with it. I am so glad I ordered this mold. I have found some really good uses. Now I love this mold!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Andrea • Tennessee
Date Submitted: 01/30/2015
I Recommend This Product!
|
|
"Love it!" |
|
COMMENTS: These were exactly what I was looking for.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
YTS • Texas
Date Submitted: 01/29/2015
I Recommend This Product!
|
|
"I love this mold for inbeds" |
|
COMMENTS: I love it for embeds. I use them for small lotion bars that I cut in 1/2 and then put them in small containers.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process, Soap - Shampoo Bars, Soap - Shave Shampoo, Lip Care, Lotion Bars & Sticks
|
|
|
|
|
Hunter • Mississippi
Date Submitted: 12/30/2014
I Recommend This Product!
|
|
"Very Nice" |
|
COMMENTS: Makes a wonderful round shape. I suggest not quite filling the cavity completely if you're making stand-alone round soaps. This way they have a flat spot to stand on and don't roll around. My only issue is that it leaks slightly at the seams, but it's easily remedied by pouring at a thicker trace, or once the base has thickened slightly.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Mariluz • Florida
Date Submitted: 09/12/2014
I Recommend This Product!
|
|
"Super Great" |
|
COMMENTS: I totally love the end product.
At first I thought it was going to be a total mess but loved the end product.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
| Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
7 Question(s) Shown Below |
| Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
|
|
|
|
