|
Wilton™ Cupcake Round Silicone Molds |
|
|
|
Additional Information |
|
Directions & Ingredients |
|
SDS & Documents |
|
|
Design festive soap cupcakes for birthday parties or other celebrations with Wilton's Cupcake Round Silicone Molds. The perfect base for your elegant soap frosting designs!
Material: Food Grade Silicone
Maximum Product Pour Temp: 500ºF
1 Pack = 12 Individual Round Shaped Cups
Measurements: 2.65 ounce bars
Dimensions: 2.25" x 1.25"
Country Of Origin: China
| | This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a). |
|
|
International Nomenclature of Cosmetic Ingredients (INCI): This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cold process soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.
Care: Hand wash in warm sudsy water.
Average Customer Rating: |
|
(17 Reviews) |
Charity • Michigan
Date Submitted: 02/16/2018
I Recommend This Product!
|
|
"Nice and Easy to work with Mold" |
COMMENTS: This works well for classes.
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
Christina • Texas
Date Submitted: 07/22/2017
I Recommend This Product!
|
|
"Cupcakes as far as the eye can see" |
COMMENTS: These cupcakes molds are very well made and are a perfect size. I have used them for both soap cupcakes and bathbomb cupcakes. So cute! Very sturdy molds.
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts
|
|
|
Mary • California
Date Submitted: 12/03/2015
I Recommend This Product!
|
|
"Cupcake Round Silicone Molds" |
COMMENTS: These are really easy to fill. The cupcakes come out easily and they looked really cute.
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
Alexandria • Tennessee
Date Submitted: 07/17/2015
I Recommend This Product!
|
|
"I love cupcake soap!" |
COMMENTS: I've just gotten into this cupcake soap stuff. But, I love these little soaps. Makes a very decent size soap and with the added toppings a very decent bar to sell. Only downfall is that you do not want to fill it to the top b/c can make it a little difficult to unmold the next day. Also remember you'll want a harder bar so that when you unmold it doesn't mush the sides.
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• makes cupcake soaps!
|
|
• the fill line on the inside
|
|
|
Home • Texas
Date Submitted: 05/28/2015
I Recommend This Product!
|
|
"Cute Cupcake Soap" |
COMMENTS: I thought I'd give cupcake soaps a shot, so I bought these molds. They're a little thinner than I thought they'd be, but I suppose that probably makes them easier to unmold (maybe the bottom being thicker would be nice). I do wish they were just a big bigger.
Overall, I'd buy them again. Great price.
|
PRODUCT USED IN: Soap - Cold Process
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Price
|
|
• Bigger Size
|
|
|
Carrie • Florida
Date Submitted: 01/05/2015
I Recommend This Product!
|
|
"Great for Cupcakes!" |
COMMENTS: These make fabulous realistic cupcakes! Uhm...soaps! I don't like the line that it leaves about 5/8th the way up so I only fill to the "line" (I guess it's there so if they were used in real baking you'd know how much to fill) and Voila! No line in my soap! Holds up great and fun to use! I love to see people's expressions when they see (and smell!) my "cupcakes" and then I tell them it's soap. Fun!
|
PRODUCT USED IN: Soap - Melt & Pour
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Makes great cupcake bottoms! • Silicone is well made • Great value!
|
|
• That "line" needs to go!
|
|
|
Diane • Pennsylvania
Date Submitted: 09/29/2014
I Recommend This Product!
|
|
"Great little molds" |
COMMENTS: I used these molds to make little ducky cupcake soaps for a show over the weekend and they were a big hit! The soap was easy to get out of the molds!
|
PRODUCT USED IN: Soap - Melt & Pour
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Very easy to get the soap out of • The different colors are nice
|
|
• Nice if they were slightly bigger
|
|
|
Mona • Alabama
Date Submitted: 08/20/2014
I Recommend This Product!
|
|
"12 little cups" |
COMMENTS: 12 little cups, very easy to unmold and store. Word to the wise, set cups in a muffin pan, then fill.
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
chris • Ohio
Date Submitted: 07/17/2014
I Recommend This Product!
|
|
"Great" |
COMMENTS: Very easy to unmold. Makes a nice soap
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
Pamela • Florida
Date Submitted: 07/02/2014
I Recommend This Product!
|
|
"Love the Ridges" |
COMMENTS: Very handy that they are separate little cups so I use a dedicated muffin tin, and the ridges are wonderful. I really like the ridges, the silicone is so easy to use and the colors while not important are pretty and fun, just makes for a fun day of soaping! The line is nice too to be able to fill to the top or consistently at a even level and it is not very noticeable when dry.
|
PRODUCT USED IN: Soap - Melt & Pour
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• love the ridges • easy • price
|
|
|
|
|
Diana • Pennsylvania
Date Submitted: 03/22/2014
I Recommend This Product!
|
|
"Love these for my CP cupcakes" |
COMMENTS: I bought these to use for my CP cupcakes. They are sturdier than the prior ones I got from another supplier. They keep their form very nicely.
|
PRODUCT USED IN: Soap - Cold Process
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Nice and sturdy and keep their shape
|
|
|
|
|
Judy • Illinois
Date Submitted: 02/13/2014
I Recommend This Product!
|
|
"Beautiful Little Cupcakes" |
COMMENTS: Perfect little cupcake shapes. Have a little line near to the top and I'm sure this is where one would fill up to if using these for actual cake to leave room for expansion while baking. I used this line so I could add a separate color - perfect for my needs!
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
erin • New York
Date Submitted: 01/29/2014
I Recommend This Product!
|
|
"Good Price for a good Product!" |
COMMENTS: works perfectly for cupcake fizzies!
|
PRODUCT USED IN: Bath Fizzies & Salts
|
|
|
Pamela • Arizona
Date Submitted: 01/15/2014
I Recommend This Product!
|
|
"Love these.." |
COMMENTS: These are the perfect shape for the cupcake soap. I love them. However I do wish they had a holder. Make sure you don't fill them up too much.
|
PRODUCT USED IN: Soap - Cold Process
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
|
|
• a holder
|
|
|
Katy • North Carolina
Date Submitted: 12/15/2013
I Recommend This Product!
|
|
"flexible, yet sturdy" |
COMMENTS: i really like these molds, they make the perfect cupcake soaps. plus they are made by wilton so i know the quality is top notch.
|
PRODUCT USED IN: Soap - Melt & Pour
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• cute colors • good brand
|
|
|
|
|
Laura • Michigan
Date Submitted: 10/07/2013
I Recommend This Product!
|
|
"Flexible, but sturdy" |
COMMENTS: These cupcake molds are wonderful for making cute adorable little cupcake soaps, along with your recipe for cupcake frosting these make great gifts, and a wonderful seller! Though cold processed soaps tend to stick but all you have to do is wait. I'm impatient, so I pop in the fridge after a couple days of being in the mold and they pop right out.
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy • flexible
|
|
• Lower cost
|
|
|
Crystal • North Carolina
Date Submitted: 06/28/2013
I Recommend This Product!
|
|
"Easy Release" |
COMMENTS: These cupcake molds worked great!! I loved the uniform size and the silicone made for easy release.
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
|
0 Question(s) Shown Below |
Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
|
|
|
|