|
Wilton™ Muffin (Petite) Silicone Mold |
|
|
|
Additional Information |
|
Directions & Ingredients |
|
SDS & Documents |
|
|
Make lotion bars, sample-sized soaps, bath fizzies, and bath melts with Wilton's Petite Muffin Silicone Mold. This mold creates tapered bars with the top being a smaller diameter than the base.
Material: Food Grade Silicone
Maximum Product Pour Temp: 500ºF
Country Of Origin: China
| | This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a). |
|
|
International Nomenclature of Cosmetic Ingredients (INCI): This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cold process soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.
Care: Hand wash in warm sudsy water.
Average Customer Rating: |
|
(10 Reviews) |
Kathleen • Alabama
Date Submitted: 02/21/2017
I Recommend This Product!
|
|
"Bath Fizzies Mold" |
COMMENTS: I recently started making bath fizzies and I have used several other silicone molds to shape them, but this mold produces the perfect size for my sinus fizzies and I really like the uniform look this mold gives them.
|
PRODUCT USED IN: Bath Fizzies & Salts, Lotion Bars & Sticks
|
|
|
Ashana • Pennsylvania
Date Submitted: 05/11/2016
I Recommend This Product!
|
|
"Larger than I expected but AWESOME!!!" |
COMMENTS: These are larger than I expected but that is my own fault for not reading thoroughly. These are a great size for bath melts, lotion bars, mini cupcakes embeds, and bath tub tabs. each "muffin" is about 1 1/2" diameter. Easy to release from the mold. These can also be used for Salt or Sugar scrub cubes.
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Bath Fizzies & Salts, Lotion Bars & Sticks, Lotions, Creams & Butters
|
|
|
Jenean • Texas
Date Submitted: 12/30/2015
I Recommend This Product!
|
|
"Cute cupcake soaps" |
COMMENTS: I drop in a paper, mini cupcake liner & pour in my soap. Then I decorate it. They are so cute.
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
Kat • Maryland
Date Submitted: 09/01/2015
I Recommend This Product!
|
|
"Perfect for samples" |
COMMENTS: I love to use these for my wax melts and sample scrubs. There the perfect size for me.
|
PRODUCT USED IN: Exfoliants & Sugar Scrubs, Candles - Paraffin, Candles - Soy
|
|
|
Carrie • Florida
Date Submitted: 05/13/2015
I Recommend This Product!
|
|
"Perfect size " |
COMMENTS: This mold is great for small hand-sized lotion bars. Fits and works well with the 2 oz tins.
|
PRODUCT USED IN: Lotion Bars & Sticks
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Perfect for lotion bars • Product removes easily
|
|
|
|
|
Lisa • Mississippi
Date Submitted: 08/13/2014
I Recommend This Product!
|
|
"Petite Mold" |
COMMENTS: This is the perfect mold. Very easy to work with. Product pops right out. Easy to clean. Couldn't ask for more. A+
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
Taniece • Florida
Date Submitted: 02/13/2014
I Recommend This Product!
|
|
"Wonderful" |
COMMENTS: All I use is silicone molds. These is great for samples.
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
Heather • Wisconsin
Date Submitted: 12/03/2013
I Recommend This Product!
|
|
"absolutely perfect for mini cupcake soaps!" |
COMMENTS: I cant keep mini cupcake soaps in stock! I wouldnt be able to do it without this mold. I love how easily the soap pops out of this mold!
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
Katy • North Carolina
Date Submitted: 11/26/2013
I Recommend This Product!
|
|
"Makes great soy tarts" |
COMMENTS: These are the perfect size for both bath melts and soy tarts, not to mention brownies!
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts, Candles - Soy
|
THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Versatile • Fizzles and tarts pop right out
|
|
|
|
|
Susan • Pennsylvania
Date Submitted: 06/19/2013
I Recommend This Product!
|
|
"Love this size!" |
COMMENTS: I love this size mold. Great for bottoms of my rubber duckies!
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
|
2 Question(s) Shown Below |
Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
|
|
|
|