International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
| Average Customer Rating: |
 |
(5 Reviews) |
|
Tony • California
Date Submitted: 08/27/2023
I Recommend This Product!
|
 |
"Fun " |
|
COMMENTS: Made my first batch of MP soap with this mold. Of course i used the hemp oil base and the cannabis fragrance oil. I had an issue releasing it from the mold. My wife did not, she just popped them right out.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Laurie • New Mexico
Date Submitted: 03/07/2021
I Recommend This Product!
|
|
"4/20 is coming up!" |
|
COMMENTS: Made these using a hemp oil recipe and 25% fluid discount. Left in mold for 24 hours. Put in freezer for one hour and then put gentle even pressure on the mold to release the soap. Came out with beautiful detail. I filled the mold very full and got 28.50 ounces of soap. (6-4.75 ounce bars). Very happy with this mold.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to release after freezing
• Great detail.
• Nice size bars, 4.75 ounce
|
|
• Nothing
|
|
|
|
LISA • Illinois
Date Submitted: 08/20/2020
I Recommend This Product!
|
|
"Great Mold!" |
|
COMMENTS: I love everything about this mold. Even when using for m&p, it was so easy to unmold. This is the perfect mold for my hemp soap! I will use this to make other products in the future.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Ease of release
• Size
• Design
|
|
• Silicone
|
|
|
|
Elizabeth • Oklahoma
Date Submitted: 06/09/2020
I Recommend This Product!
|
|
"Love this mold!" |
|
COMMENTS: I had my eye on this mold for a while and when it went on sale I finally grabbed a couple, along with your new Cannabis fragrance oil. This combo made a gorgeous bar that people love to buy as gifts!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Design
|
|
|
|
|
|
Elizabeth • Alabama
Date Submitted: 12/19/2018
I Recommend This Product!
|
|
"Great for hemp oil soap" |
|
COMMENTS: Soap made in this mold was a big hit at my last show. I made some hemp oil soap and some psychedelic swirled soaps that were picked up for fun gifts.
To ease unmolding, I sprayed some cyclomethicone before pouring. Helps with cold process soaps!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• fun design
|
|
|
|
|
| Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
2 Question(s) Shown Below |
| Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
