|
|
Farmhouse Silicone Mold 1618 |
|
|
|
 |
Additional
Information |
|
Directions &
Ingredients |
|
SDS &
Documents |
|
|
The Farmhouse Silicone Mold creates four rectangular bars of soap. The deep mold is complete with ridges that will bring nice texture to soap and lotion bars!
Common Uses:
Melt & Pour Soap. Cold & Hot Process Soap.
Points of Interest:
Material: Food Grade Silicone
Maximum Product Pour Temp: 500ºF
Country Of Origin: China
|
Directions:
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.
Care:
Hand wash in warm sudsy water.
| Average Customer Rating: |
 |
(19 Reviews) |
|
Janet R • Wisconsin
Date Submitted: 10/30/2020
I Recommend This Product!
|
|
"Wonderful Mold!" |
|
COMMENTS: I bought one for just my own soaps. I thought it would be a nice size for my family. Now I'm waiting for them to get back in stock to order more as my customers seem to think the same. Easy to remove my soap and I love the design on the top of the mold.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
MARIA • California
Date Submitted: 02/25/2020
I Recommend This Product!
|
|
"Great for hand size soap!" |
|
COMMENTS: Love this mold for my melt & pour oatmeal soap. Looks nice & is great size
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Julia • Virginia
Date Submitted: 07/01/2019
I Recommend This Product!
|
|
"Love this!" |
|
COMMENTS: Makes it so much easier to have evenly portioned bars. I will definitely order another one! Love the texture on top too.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
TALANDA • Oklahoma
Date Submitted: 04/08/2019
I Recommend This Product!
|
|
"Perfect Mold" |
|
COMMENTS: This mold was perfect for my facial bars, popped out perfect bars every time. I love the grooves at the bottom!!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Cristy • New Jersey
Date Submitted: 03/11/2019
I Recommend This Product!
|
|
"found my favorite" |
|
COMMENTS: I've bought quite a few molds and I have to say that this one is now my favorite and silicone is so easy to work with.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
|
|
|
|
|
|
Stephanie A • Massachusetts
Date Submitted: 02/22/2019
I Recommend This Product!
|
|
"Makes a Great Masculine Soap Bar!" |
|
COMMENTS: Makes a Great Masculine Soap Bar! Perfect size
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Mary • New Mexico
Date Submitted: 11/29/2018
I Recommend This Product!
|
|
"Really neat!" |
|
COMMENTS: I used this mold for the first time today and can already tell it's going to be one of my favorites! I only made my bars 4.5 ounces instead of filling the mold up completely. Love it!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• The ridges
• Easy to use
|
|
• Nothing
|
|
|
|
Pamela • Florida
Date Submitted: 06/04/2018
I Recommend This Product!
|
|
"So cute" |
|
COMMENTS: I like the basic shape with the added texture.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Carol • Missouri
Date Submitted: 04/03/2018
I Recommend This Product!
|
|
"Nice mold" |
|
COMMENTS: I like this mold on several levels. It's great for melt & pour soap. Color or fragrance doesn't seem to stain the mold so far. And I like it to make some of my lotion bars. Both soap and lotion bars pop out really easy and without any hassle. May buy another since this may be one of my go to molds.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• doesn't stain
• easy to get product out of
|
|
• nothing
|
|
|
|
Silva • Ohio
Date Submitted: 04/02/2018
I Recommend This Product!
|
|
"A large bar" |
|
COMMENTS: I like this soap mold because it makes a bar that is suitable for men with large hands. It also provides a bar of soap that looks more primitive.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Shape and size of mold
• Ease of unmolding
|
|
• None
|
|
|
|
Sharon • California
Date Submitted: 02/22/2018
I Recommend This Product!
|
|
"Easy to use and hold" |
|
COMMENTS: I love this mold. It easy to hold and has a nice appearance to it. I think this is way better than the square or rectangle molds.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts, Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• The size. Soap pops out easy.
|
|
• Nothing
|
|
|
|
Dorene • Georgia
Date Submitted: 01/31/2018
I Recommend This Product!
|
 |
"I Like IT!" |
|
COMMENTS: The soap releases easily and it fits in your hand well. My only wish is that it would be longer length side.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• strong
• soap releases well
• does not bow
|
|
• lengthwise could be longer.
|
|
|
|
Russell • Iowa
Date Submitted: 12/12/2017
|
 |
"Like the concept, didn't last" |
|
COMMENTS: Dig the shape, easy to package and label, customers like it. On about my 6th time using it, it tore while unmolding. Note sure what the deal is. I put a piece of tape over it to stop the leak, and ordered another. If this one tears it's gone. Too expensive for that jazz.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Shape, size, etc.
|
|
• Slightly more elastic silicone I suppose
|
|
|
|
Donna • California
Date Submitted: 11/21/2017
I Recommend This Product!
|
|
"Nice Molds" |
|
COMMENTS: I really like these molds, they are a good size and easy to unmold. People like the ridges on the bottom to hold on to and they make so the whole soap is not laying flat on the sink.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process, Soap - Shampoo Bars
|
|
|
|
|
Katherine • Ohio
Date Submitted: 11/14/2017
I Recommend This Product!
|
|
"Quality Mold" |
|
COMMENTS: This mold produces a bar that fits comfortably in your hand. Soap releases easily. The silicone is thick, and I believe it should last a long time.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
JY • New Jersey
Date Submitted: 07/08/2017
I Recommend This Product!
|
|
"Love!!" |
|
COMMENTS: I absolutely love this soap mold! The size of the bar is perfect, it fits heavy in the palm and the ridges are such a nice touch. It's a simple bar with a nice touch that adds a little bit of a wow factor. The mold is flexible and pops the soap right out, super easy and convenient to use.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• sturdy
• great size
• flexible
|
|
|
|
|
|
Sherrene • Washington
Date Submitted: 06/01/2017
I Recommend This Product!
|
|
"More cavities, PLEASE" |
|
COMMENTS: I REALLY LIKE THIS MOLD! It is so sturdy and makes a big bar. I put a lot of scrubbie stuff in the mechanics, chefs and gardeners soap I make and this mold holds its shape wonderfully! The rippled front gives a good grip on the bars and I have had several folks say they like the hand feel and grip of this bar.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Shape, texture, big bar size, sturdiness
|
|
|
|
|
|
Anna • Ohio
Date Submitted: 05/25/2017
I Recommend This Product!
|
|
"Awesome soap mold!" |
|
COMMENTS: This mold makes a chunky beautiful bar of soap perfect for men. I am going to buy another one!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything
|
|
• Nothing
|
|
|
|
Joanna • Pennsylvania
Date Submitted: 05/10/2017
I Recommend This Product!
|
|
"I love this mold!" |
|
COMMENTS: This mold is perfect for cold process, the bars come out so easily!
I will definitely order more!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
| Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
3 Question(s) Shown Below |
| Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
|
|
|
|
