|
|
Rectangle Guest Silicone Mold 1610 |
|
|
|
 |
Additional
Information |
|
Directions &
Ingredients |
|
SDS &
Documents |
|
|
We love this mold for making soap for visiting guests around the holiday. Professional soapers use it to craft soap for the hospitality industry.
Country Of Origin: China
|  | This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a). |
|
|
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.
Care:
Hand wash in warm sudsy water.
| Average Customer Rating: |
 |
(49 Reviews) |
|
Oliver • California
Date Submitted: 03/05/2023
I Recommend This Product!
|
|
"Perfect Size and Shape" |
|
COMMENTS: When trying a new batch of soap, I send out samples to my testers, and these are a perfect size for it. The 2 oz gives enough so one can test it thoroughly without giving away a full size product. It's very easy to pop the soaps out of the molds. I've put mine through the dishwasher before with no issues.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size
• Shape
• Ease of soap removal
|
|
|
|
|
|
Sandy • New York
Date Submitted: 09/04/2019
I Recommend This Product!
|
|
"Perfect Mold" |
|
COMMENTS: Perfect for my melt and pour guest soaps.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Judith • Colorado
Date Submitted: 12/10/2017
I Recommend This Product!
|
|
"Rectangle Guest Silicone Mold 1610" |
|
COMMENTS: Good size for guest soaps and lotion bars. Perfect size for travel soaps or making a sampler of your soap products. I am thinking of making small batches of all my favorites and sell 4-5 in a bundled pack. Love them, I purchased 2 molds, may have to buy a couple of more in the near future.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Lotion Bars & Sticks
|
|
|
|
|
kris • Florida
Date Submitted: 02/28/2017
I Recommend This Product!
|
|
"Rectangle guest mold" |
|
COMMENTS: Perfectly sized guest mold. Sturdy silicone. Used for M&P and also CP soap worked great for both.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Sharon • Texas
Date Submitted: 02/14/2017
|
 |
"soap bars" |
|
COMMENTS: love how easy it is to get product out of mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process, Lotion Bars & Sticks
|
|
|
|
|
Kristy • Michigan
Date Submitted: 02/11/2017
I Recommend This Product!
|
|
"Great Quality! " |
|
COMMENTS: Love this mold! Perfect size for testing out recipes and gift giving! The quality is absolutely the best I've used. Will be purchasing more styles.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Cassandra • Texas
Date Submitted: 02/02/2017
I Recommend This Product!
|
|
"Rectangle Guest Silicone Mold" |
|
COMMENTS: This is a nice size mold for my test batches. Soaps come out easily!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Joy • Michigan
Date Submitted: 11/01/2016
I Recommend This Product!
|
 |
"Rectangle Guest Silicone Mold 1610" |
|
COMMENTS: This is an excellent little mold for gift and/or guest soaps. I likethe simple, clean lines of the bars.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Great size for small gift basket items
|
|
• Nothing
|
|
|
|
Dana • California
Date Submitted: 09/11/2016
I Recommend This Product!
|
|
"Love this mold!" |
|
COMMENTS: I love these molds. The only thing is that sometimes the fragrance oil smell is hard to get out. Soaps unmold easily. I will definitely be buying more.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Michael • Virginia
Date Submitted: 07/14/2016
I Recommend This Product!
|
|
"Just what we needed. Ordering more!" |
|
COMMENTS: Just right. We needed a guest size for our product line. Will be buying more of these.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Shampoo Bars, Soap - Shave Shampoo
|
|
|
|
|
Jamie • Arizona
Date Submitted: 05/18/2016
I Recommend This Product!
|
|
"Rectangle Guest Silicone Mold 1610 " |
|
COMMENTS: This mold is perfect for soap samples or soap favors. I actually used this mold to make shower steamers. I like the shape because it is not the typical mold most use and prevents someone accidentally mixing up their bath melts with steamers. I love the rectangle style.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Bath Fizzies & Salts
|
|
|
|
|
Pamela • Ohio
Date Submitted: 04/13/2016
I Recommend This Product!
|
|
"LOVE LOVE LOVE" |
|
COMMENTS: This mold is so easy to work with.. I just love it using it. Need to buy a few more
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Michele • Virginia
Date Submitted: 04/12/2016
I Recommend This Product!
|
|
"Awesome Product" |
|
COMMENTS: This is a great mold. It is VERY sturdy and is a true 2 oz. bar. Very easy to use and washes up beautifully.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
John R • Pennsylvania
Date Submitted: 02/27/2016
I Recommend This Product!
|
|
"Awesome" |
|
COMMENTS: Love it!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Julie • Virginia
Date Submitted: 01/20/2016
I Recommend This Product!
|
|
"Rectangle guest soap mold" |
|
COMMENTS: Love this mold.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
• ease of use
|
|
• nothing
|
|
|
|
Angela • Arizona
Date Submitted: 01/07/2016
I Recommend This Product!
|
|
"Love Love Love" |
|
COMMENTS: I recently used rectangle soap mold for CP soap; it pop out so easy and the shape and size was perfect. I will definitely be ordering a few more.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Ease of release
• Size
|
|
• More cavities to fill
|
|
|
|
Jaazia • Mexico
Date Submitted: 12/10/2015
I Recommend This Product!
|
|
"Like it very much" |
|
COMMENTS: This Silicone Mold is so easy to work with.. I just love it... size is perfect and my clients like it very much... I need to buy more.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to unmold
• Easy to wash
• Size is perfect por guest soap
|
|
|
|
|
|
Deana • California
Date Submitted: 10/23/2015
I Recommend This Product!
|
|
"Silicone Mold Guest" |
|
COMMENTS: Ive made one batch so far and I only filled the cavities 1/2 way to give myself 1 oz bars. Worked perfect and the come out easy
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Deborah • Arkansas
Date Submitted: 09/15/2015
I Recommend This Product!
|
|
"Rectangle guest mold 1610" |
|
COMMENTS: Really like this mold. I plan on making a variety pack of 4 guest bars to use in my gift sets.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
• easy to remove soap
|
|
|
|
|
|
Mary • Nevada
Date Submitted: 08/22/2015
I Recommend This Product!
|
|
"Retangle Guest mold" |
|
COMMENTS: Love the size. Perfect for small size hands!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
William • North Carolina
Date Submitted: 08/14/2015
I Recommend This Product!
|
|
"I LOVE this mold!" |
|
COMMENTS: I ordered this mold to make travel size bars and it is PERFECT! So perfect that I had to order another one and plan on getting at least 2 more. This mold is easy to use, cleans well, and makes a perfect bar of soap.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy
• Smooth finish
• Size
|
|
|
|
|
|
Lynne • New Mexico
Date Submitted: 08/09/2015
I Recommend This Product!
|
|
"Perfect size" |
|
COMMENTS: I love these guest molds. They're the perfect size for sample and test bars.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
|
|
• nothing
|
|
|
|
Sharon • Ohio
Date Submitted: 07/07/2015
I Recommend This Product!
|
|
"Perfect" |
|
COMMENTS: Perfect mold for guest soaps. Very easy to use. Releasing the soap is a breeze.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Mary • California
Date Submitted: 06/27/2015
I Recommend This Product!
|
|
"Rectangle Guest soap mold" |
|
COMMENTS: The perfect size for making gift/sample size bars. They unmold easily and have a nice finish.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Lotion Bars & Sticks
|
|
|
|
|
Anthony • Ohio
Date Submitted: 03/28/2015
I Recommend This Product!
|
|
" Rectangle Guest Silicone Mold 1610 " |
|
COMMENTS: Excellent product to make bars of soap products in the sizes meant for gifts, samples or travel size! Recommended to all!!!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Shampoo Bars, Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Ease of use
• Easy removal of product
• reusability
|
|
|
|
|
|
Kimberly • Michigan
Date Submitted: 03/21/2015
I Recommend This Product!
|
|
"Rectangle Silicone Guest Soap Mold" |
|
COMMENTS: Love this mold! Silicone makes it easy to "pop" soaps right out! Makes a cute 2 oz bar! Easy to use and to clean!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to Use
• Easy To clean
|
|
• Price
|
|
|
|
Stacey • South Carolina
Date Submitted: 03/03/2015
I Recommend This Product!
|
|
"Great size!" |
|
COMMENTS: I love this mold for cute little guest sized soap. It is easy to get the soap out. I would recommend!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
natcorr • Ohio
Date Submitted: 02/24/2015
I Recommend This Product!
|
|
"great little mold" |
|
COMMENTS: This is a nice mold. Small sized bars that are perfect for on the go. Lotion bars are great size!
|
|
PRODUCT USED IN: Lotion Bars & Sticks, Massage Oils
|
|
|
|
|
Christina • California
Date Submitted: 02/20/2015
I Recommend This Product!
|
|
"Great look but NOT 2oz" |
|
COMMENTS: This is a great mold for SAMPLE, GUEST or FAVOR soap bars. Keep in mind they are very small. They do make a nice looking bar and a nice size to make sample products, guest size bars or for party favors. Another factor to keep in mind is that it does not hold a true 2oz. I poured my melt and pour soap in the mold until it started to seep over a little. I let it harden completely then weighed it. This mold holds 1.8 oz of soap. I recommend using 1.5oz of soap base and saving the other oz for your additions. Unless you don't mind wasting a little soap. :)
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Quality of mold
• Easy to clean
• Fragrance does not stay on mold
|
|
• Make it 2oz
|
|
|
|
YTS • Texas
Date Submitted: 01/29/2015
I Recommend This Product!
|
|
"love them" |
|
COMMENTS: I can make a full loaf and cut them into 1/2" slices and have very cute and little waste of soap. My guest love them and they are perfect to use as an extra mold for the left over soap to give as samples.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process, Soap - Shampoo Bars, Lotion Bars & Sticks
|
|
|
|
|
Elizabeth • Panama
Date Submitted: 12/09/2014
I Recommend This Product!
|
|
"great mold" |
|
COMMENTS: Loved it! Great quality, good price. The silicone is thick enough to hold everything in place. No warping on the sides. Of course its small so there shouldn't be all that much warping even for a lower class mold, but if they use this same materials for the bigger ones, you'd get no warping or fat sides.. Seeing this results makes me regret not buying regular size and loaf size. BEWARE OF SIZE. Its 2 fluid oz size. Not 2 oz of finished soap.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• quality
|
|
• warning of the actual size
|
|
|
|
christy • Maine
Date Submitted: 08/11/2014
I Recommend This Product!
|
|
"Love this mold!!!" |
|
COMMENTS: This mold is so easy to get my soap out of and my customers love the size as I call them a try me or guest size. Definately recommend this mold!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Easy to use
|
|
• nothing
|
|
|
|
Melissa • New York
Date Submitted: 08/03/2014
I Recommend This Product!
|
|
"Awesome Product" |
|
COMMENTS: I ordered this product after using store bought plastic molds. This product has made my life so much easier and makes amazing soap molds! I couldn't be happier with the product.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Lori • Ohio
Date Submitted: 07/02/2014
I Recommend This Product!
|
|
"Love it!" |
|
COMMENTS: This is my second one of these. I have made over 100 bars with my first one and have had no problems such as unmolding or tearing. They are great and I will continue to use. Thanks!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Ease of use
• cleans easily
• size
|
|
• nothing
|
|
|
|
Jeremy • California
Date Submitted: 06/30/2014
I Recommend This Product!
|
|
"Nicely shaped guest mold" |
|
COMMENTS: I love the shape and size of the rectangles in the 1610 guest mold and was disappointed that Crafter's Choice's guest log mold generates squares rather than the neat rectangles of the 1610. I've used them with a few drops of colored "batter" added and swirled with a chopstick to make nice little guest soap. The size is perfect for traveling, a generous sample, or a modest gift.
I suggest using a good deal of sodium lactate to aid in mold release. I have had the lower corners stick even with 1-2%.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Size of bar = perfect
|
|
• I'd make the overall mold larger
|
|
|
|
Deborah • Barbados
Date Submitted: 04/25/2014
I Recommend This Product!
|
|
"Great Mold" |
|
COMMENTS: Great size for guest or sample soap. I'll be ordering more.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Mariluz • Florida
Date Submitted: 04/25/2014
I Recommend This Product!
|
|
"nice" |
|
COMMENTS: Great
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
ginger • Florida
Date Submitted: 04/18/2014
I Recommend This Product!
|
|
"great for guest soaps" |
|
COMMENTS: I had an order for guest soaps for wedding favors. this was perfect. the silicone mold made it easy to get the soap out and was the perfect size.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• silicone
|
|
|
|
|
|
Andrea • Kentucky
Date Submitted: 04/15/2014
I Recommend This Product!
|
|
"Sample Bars" |
|
COMMENTS: Love, love, love this mold! It makes the perfect little sample bars for customers.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
andrea • Texas
Date Submitted: 03/08/2014
I Recommend This Product!
|
|
"Love this mold" |
|
COMMENTS: I love every one of crafters choice molds. You will always find a use for them. Great release,clean edges.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Lotion Bars & Sticks
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Must have
• Need to buy more
|
|
|
|
|
|
brittny • Florida
Date Submitted: 02/27/2014
I Recommend This Product!
|
|
"Great for embeds" |
|
COMMENTS: These area great size for my wedding favor soaps! Great for large orders too that have embeds.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size
• multiple cavities
|
|
|
|
|
|
Melissa • Mississippi
Date Submitted: 02/05/2014
I Recommend This Product!
|
|
"Awesome Guest Size" |
|
COMMENTS: This mold works very well with M&P soap base. It's the perfect size to use for decoration or to give to your guest to use. Mold holds up very well and is easy to unmold your soap. I highly recommend this and the other Crafter's Choice silicone molds...they make making soap SO much easier.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Georgia • Missouri
Date Submitted: 10/24/2013
I Recommend This Product!
|
|
"Great for guests" |
|
COMMENTS: This is a great size for guest soaps. Customers like the rectangle shape, since it reminds them of the soaps from hotels, and one bar holds up for several uses. This is a great mold for samples and tests, too. I love how durable the mold is.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Durable
• Holds shape
• Great size bar cavities
|
|
|
|
|
|
Christen • Florida
Date Submitted: 10/18/2013
I Recommend This Product!
|
|
"Perfect!" |
|
COMMENTS: I have used this mold for both MP and CP. It holds up great after tons of use and makes the perfect size guest bar. In CP, make sure you add sodium lactate to your recipe so it will firm up and be able to be unmolded. Great price and great quality. I've never been disappointed by a Crafters Choice mold yet.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Christina • Florida
Date Submitted: 09/28/2013
I Recommend This Product!
|
|
"Just right!" |
|
COMMENTS: This mold is the perfect size for samples and party favors - enough for several uses. I'm able to pour exactly 1 lb. of melt & pour soap to fill this completely, each cavity is 2 ounces. I've had these for two years and they are still in the same condition as when I first bought them, even through hundreds of uses. An excellent value.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Becky • New Jersey
Date Submitted: 08/23/2013
I Recommend This Product!
|
|
"Amazing Mold For Melt & Pour ! :D" |
|
COMMENTS: This mold is great ! Very high quality and not flimsy at all ! Makes very professional looking bars ! Also perfect for tester bars / gift soaps ! I have two and might get more soon ! :D
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Nice Quality
• Creates Professional Looking Bars
• Not Flimsy
|
|
|
|
|
|
cathy • Georgia
Date Submitted: 08/20/2013
I Recommend This Product!
|
|
"easy" |
|
COMMENTS: this is the easiest way to make melt & pour soap. soaps pop right out!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Carrie • Maine
Date Submitted: 08/07/2013
I Recommend This Product!
|
|
"Great size for sample soaps" |
|
COMMENTS: This mold is adorable and makes a nice 2 ounce bar of soap. Great for guest soaps, travel soaps. I made a batch of cold process soap and used this mold to make Luffa Soap. Worked out great, I simple cut the luffa in half and added one to each mold. Looks adorable. I will be purchasing more. Great to use when you have extra soap batter. Mold holds 10 ounces and would be great to use for test batches. Works great when layering colors as well. There is allot of room in the 2 ounce squares. Highly recommend.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Quality & Durability of product
• 2 ounce mold size is perfect
|
|
|
|
|
|
Barbara • Indiana
Date Submitted: 07/30/2013
I Recommend This Product!
|
|
"Perfect sample size" |
|
COMMENTS: This mold is so perfect for my sample bars. I waited to order this but wish I had ordered a couple extra. Will order it again.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• perfect little soap bars.
|
|
|
|
|
| Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
3 Question(s) Shown Below |
| Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
|
|
|
|
