|
|
Tray 12 Rectangles Silicone Mold 1701 |
|
|
|
 |
Additional
Information |
|
Directions &
Ingredients |
|
SDS &
Documents |
|
|
This silicone tray mold is wonderful for MP, CP, HP, and CPOP soap projects. Pour twelve bars at once to save time! It also has grooves to ease in cutting straight bars once the soap has hardened.
Material: Food Grade Silicone
Maximum Product Pour Temp: 500ºF
Tray Measures: 10" x 10.5" x 1.25"
Top of bar is perfectly straight without rounded corners. Mold walls are built with extra thickness to prevent bowing.
Country Of Origin: China
|  | This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a). |
|
|
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.
Directions:
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.
Care:
Hand wash in warm sudsy water.
| Average Customer Rating: |
 |
(59 Reviews) |
|
Dawn • Texas
Date Submitted: 10/14/2019
I Recommend This Product!
|
|
"Crafters Choice Tray 12 Rectangulars Silicone Mold" |
|
COMMENTS: Very easy to use and clean. Great product.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Lindsey • New Mexico
Date Submitted: 03/23/2019
I Recommend This Product!
|
|
"Great mold!" |
|
COMMENTS: I was hesitant to buy this mold due to the large size and the increase in the number of oils I had to use. I am glad that I went ahead and purchased this mold because it ended up working perfectly for cold process soap. The mold leaves a straight line on the bar which makes cutting so much easier. Prior to this, I could not cut straight bars of soap. Plus you can still make intricate designs in your bars of soap. I completely love this mold.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything
|
|
• Nothing
|
|
|
|
Laurel • New York
Date Submitted: 12/13/2018
I Recommend This Product!
|
|
"Milds" |
|
COMMENTS: I wouldn’t be able to make my soap without these! They are perfect!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
marina • Illinois
Date Submitted: 10/10/2018
I Recommend This Product!
|
|
"Great Mold" |
|
COMMENTS: This mold is great. Bars are really easy to cut into even pieces
No problem at all
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything
|
|
• Nothing
|
|
|
|
Rebecca • Texas
Date Submitted: 09/04/2018
I Recommend This Product!
|
|
"New mold.." |
|
COMMENTS: I purchased these molds because the ones I had been using were no longer available. To be honest, I delayed trying these because I wasn't sure they were going to work for me. When I finally gave in, I was sorry I had not used them earlier. I was able to easily move the molds after pouring. I just let them set up a bit first. Unmolding was so easy! I have been using them for several months now, and they are holding up well. I am very pleased.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Unmolding easy
• Scored for easy cutting
• Don't crack!
|
|
|
|
|
|
Marcia • South Carolina
Date Submitted: 08/24/2018
I Recommend This Product!
|
|
"Awesome Mould" |
|
COMMENTS: Made CP soap with this and whole slab came out perfect.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything
|
|
|
|
|
|
carolina • New York
Date Submitted: 08/22/2018
I Recommend This Product!
|
|
"awesome" |
|
COMMENTS: favite mold it actually holds way more then 60 oz cus i always have so much more space left after i pour 60 i tested it once its more like 72 oz, cool cus u can add embeds in ur soap and still have it with 60oz of soap
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Nicole • New York
Date Submitted: 06/09/2018
I Recommend This Product!
|
|
"The best mold ever!" |
|
COMMENTS: This is by far, my favorite mold. I was using loaf molds, and decided to give this one a try for variety. I'm now switching to these for everything. The size is perfect, the construction is Sturdy love love love
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy sides
• Bar size
• Cut lines
|
|
|
|
|
|
Jill • Missouri
Date Submitted: 05/22/2018
I Recommend This Product!
|
|
"Perfect Mold - I have 2 " |
|
COMMENTS: I really like this mold - it makes a dozen nice large bars of soap. it's sturdy and easy to clean! What more do you need. Would love to have a mold like this in smaller sizes.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Sturdy
• Easy to clean
|
|
• Nothing.
|
|
|
|
Mom’s House • Missouri
Date Submitted: 04/10/2018
I Recommend This Product!
|
|
"Top Notch" |
|
COMMENTS: Really like this mold. Releases well and no staining. It is easiest to invert on a cutting board to unmold and just let the weight pull the soap out. The scores are nice and really help cutting. I got just the tiniest bit of bowing on the sides but not a big problem. But, speaking as a hobbyist, I would prefer if it were about 1/2 the size. This mold is big, but that's no fault of the mold. One just needs understand this will hold 5 lbs of batter. The silicone is sturdy, but with that weight, it does need bottom support.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Scores
• Releases well
|
|
• Size
|
|
|
|
Michael • Nevada
Date Submitted: 02/22/2018
I Recommend This Product!
|
|
"Love it" |
|
COMMENTS: Bought one and love it so much I'm considering making my entire line of soap this shape. Only had a slight issue with 1 corner while removing soap from the mold but it's ok, I'm pretty sure I was being impatient and tried too soon.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Ms. • New York
Date Submitted: 10/01/2017
I Recommend This Product!
|
|
"Tray rectangle Silicone mold" |
|
COMMENTS: Mold was very easy to use. Produces large bars, Love it.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
kara • Virginia
Date Submitted: 06/08/2017
I Recommend This Product!
|
|
"Incredible" |
|
COMMENTS: Best mold ever. So easy to use and cut nice even bars! Cant reccomend this mold enough! No need to line or any of that time comsuming stuff, i absolutely love this mold!
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP, Soap - Hot Process, Soap - Shampoo Bars
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Great price
• Easy to use
• Works well
|
|
|
|
|
|
Ellen • Maryland
Date Submitted: 06/01/2017
I Recommend This Product!
|
|
"My Go-To" |
|
COMMENTS: This is my new "Go-to" mold when I make CP soaps (I like my loaf mold for HP). The sides don't warp at all with the soap in there and it comes out clean. The scoring makes it easy to cut, then I just clean up the sides with a planer.
The only downside of the scoring is that they are a bit more prominent than I would like (maybe 1/16").... I have to be mindful of that if I am trying to do a swirl throughout the entire bar that my chopstick will catch slightly. I think the scores could be a bit more shallow and still function as intended while reducing catch while swirling.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• easy clean
• releases soap easily
• pre-scored for cutting
|
|
• scoring not so deep
|
|
|
|
t dominique • Maryland
Date Submitted: 03/05/2017
I Recommend This Product!
|
|
"12 bar rectangle silicone mold" |
|
COMMENTS: This is a heavy duty well made mold. The lines in the bottom make it very easy to cut soaps evenly.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• everything
|
|
• nothing
|
|
|
|
ABELLE • New Jersey
Date Submitted: 03/01/2017
I Recommend This Product!
|
|
"amazing!" |
|
COMMENTS: this mold is very strong. use it for all my CP soap.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• material
|
|
|
|
|
|
carolyn • West Virginia
Date Submitted: 02/06/2017
I Recommend This Product!
|
|
"Crafters Choice™ Tray 12 Rectangles Silicone Mold " |
|
COMMENTS: Easy to use, and soap is easy to get out
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Kimberly • Texas
Date Submitted: 02/04/2017
I Recommend This Product!
|
|
"Awesome mold" |
|
COMMENTS: I love this mold. It is sturdy for silicone. I do set it on a cookie sheet to move it without disturbing my soap.
I love the score marks on the bottom. Makes it easy to cut the soap into bars.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Score marks on the bottom
• Silicone
|
|
|
|
|
|
Shenenia • Virginia
Date Submitted: 02/02/2017
I Recommend This Product!
|
|
"Just what I needed" |
|
COMMENTS: I love this mold! Can't wait to make my soaps in my new mold. Will be ordering another one!
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Adriana • Florida
Date Submitted: 12/01/2016
I Recommend This Product!
|
|
"silicone tray" |
|
COMMENTS: What a amazing tray. The soap just came right out, no twisting no fussing. Beautiful mold. Love it.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
CYNTHIA • Louisiana
Date Submitted: 10/25/2016
I Recommend This Product!
|
|
"my new fave mold" |
|
COMMENTS: I've had my eye on a slab mold for some time now. Finally ordered this and wondered what took me so long! It supports itself well and is well-made, but to tap down for any bubbles, I would suggest making some sort of wooden frame. Only because my recipe filled the mold up to the tippy top and when I tapped down, there was a little bit of spillage. Best feature is the ability to cut where the markings are on the bottom. All my bars were the same size---fool proof!
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP, Soap - Hot Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• size, easy of use, sturdy construction
|
|
|
|
|
|
Diane • Michigan
Date Submitted: 09/24/2016
I Recommend This Product!
|
|
"Crafters Choice™ Tray 12 Rectangles Silicone Mold " |
|
COMMENTS: This mold worked just fantastic for my CP soap. I put it on a cookie sheet to stabilize it and popped it in the oven to CPOP it. The soap was easy to remove, too. I'm so glad I got it, it worked great.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Quality
• Size
• Easy to use
|
|
|
|
|
|
Beverly • Michigan
Date Submitted: 07/06/2016
I Recommend This Product!
|
|
"Good mold " |
|
COMMENTS: Love this mold. Use it a lot. Doesn't release as clean as I would like, leave soap in a few extra days. The lines are nice, but i always end up with some crooked bars.
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
|
|
|
|
|
Mary • Ohio
Date Submitted: 06/23/2016
I Recommend This Product!
|
|
"Great for large batches" |
|
COMMENTS: This is perfect for large batches of soap - love this tray.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
monet • Alabama
Date Submitted: 05/30/2016
I Recommend This Product!
|
|
"Best mold I've ever used!" |
|
COMMENTS: Worth every penny of purchase. I've been soaping for more than 20 years and the ease of unmolding is awesome. Soap pops outs the next morning. I use 52 oz oil, 2:1 water/lye to fill mold to the top.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• very sturdy
• no bowing or warping
• smooth, glsssy finish
|
|
|
|
|
|
Diana • California
Date Submitted: 04/20/2016
I Recommend This Product!
|
|
"Fabulous Mold!" |
|
COMMENTS: I use this for cold process, and I like to add sodium lactate for hard bars. I like to wait 48 hours before unmolding, and the soap comes right out smooth with no blemishes. The score lines are great for cutting. I love it!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything
|
|
• Nothing
|
|
|
|
KELLY • North Carolina
Date Submitted: 03/30/2016
I Recommend This Product!
|
 |
"Perfect Mold" |
|
COMMENTS: As first I was a little apprehensive, thinking it would be difficult to remove the finished soap product. But I was happily surprised at how EASY it was to unmold all the soap bars. Great product!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Thelma • Georgia
Date Submitted: 02/15/2016
I Recommend This Product!
|
|
"My Fail Proof Mold" |
|
COMMENTS: This mold is the backbone of my soap business. I use it constantly and it holds up beautifully. Please don't change it!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• everything
|
|
• a tad bit expensive
|
|
|
|
Deborah • Pennsylvania
Date Submitted: 01/12/2016
I Recommend This Product!
|
|
"Silicon mold" |
|
COMMENTS: I love the mold, it was so easy to cut them into perfect size bars for my cold process soap.
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Everything
|
|
• Nothing
|
|
|
|
Rhonda • Louisiana
Date Submitted: 11/23/2015
I Recommend This Product!
|
|
"Forever Mold" |
|
COMMENTS: This mold will last forever I think. Great mold!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Jen • California
Date Submitted: 09/18/2015
I Recommend This Product!
|
|
"Love this mold" |
|
COMMENTS: Love this mold so much! Easy to unmold and the markings make cutting the bars very easy.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Marie • South Dakota
Date Submitted: 08/11/2015
I Recommend This Product!
|
|
"excellent quality" |
|
COMMENTS: This mold is of excellent quality. I like the fact it is scored on the bottom making it easy to cut the soap bars after removing them from the mold. It makes it easy to make several bars at a time.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Excellent Quality
|
|
|
|
|
|
Taniece • Florida
Date Submitted: 04/10/2015
I Recommend This Product!
|
|
"12 tray rectangle Miller" |
|
COMMENTS: These fit perfectly inside the rectangle soap boxes! Perfect size soap!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
catherine • Pennsylvania
Date Submitted: 02/26/2015
I Recommend This Product!
|
|
"Nice quality" |
|
COMMENTS: Comparing this to some other silicone molds I have I can say that this is sturdy and strong yet flexible as expected. I love that you can see through it a bit to get a side view, especially with layers. Priced a bit higher then some but I expecte with the quality this will stand up to more.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Richard • Nevada
Date Submitted: 01/28/2015
I Recommend This Product!
|
|
"Love!" |
|
COMMENTS: Absolutely love this mold! Very durable, easy to unmold and cut!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• unmolding
• cutting
• durability
|
|
|
|
|
|
Linda • North Carolina
Date Submitted: 01/21/2015
I Recommend This Product!
|
|
"Nice mold" |
|
COMMENTS: This mold worked very well with my M&P peppermint bark soap project for Christmas. This mold will be used in a lot of projects. It is easy to use and clean. Good quality.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Rachel • Missouri
Date Submitted: 01/12/2015
I Recommend This Product!
|
|
"<3 <3 <3" |
|
COMMENTS: I love this mold!!! Big bars, cutting lines, so easy to pour & unmold. I will definitely be buying more of these.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
karen • Maryland
Date Submitted: 12/26/2014
I Recommend This Product!
|
|
"works well" |
|
COMMENTS: This silicone mold is a heavy duty, I like this mold the best for bar soaps.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Cheryl • Texas
Date Submitted: 10/29/2014
I Recommend This Product!
|
|
"Better then expected" |
|
COMMENTS: I am very pleased with this mold. I make Hot Process Soap and I was able to take the mold off after the batch sat for about 2 hours in the cool air. Came off clean with the score marks perfect for cutting. I would recommend this mold for Hot Process Soaps! Very easy to clean and with stood the heat from the hot process!
|
|
PRODUCT USED IN: Soap - Hot Process
|
|
|
|
|
Janet • North Carolina
Date Submitted: 10/04/2014
I Recommend This Product!
|
|
"So easy to use" |
|
COMMENTS: I love having this flat mold which makes it easy to see where to cut the bars. A winner for me.
|
|
PRODUCT USED IN: Soap - Hot Process
|
|
|
|
|
Mariluz • Florida
Date Submitted: 09/12/2014
I Recommend This Product!
|
|
"Really nice" |
|
COMMENTS: Prefect for making large quantity easily.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Callie • Virginia
Date Submitted: 07/29/2014
I Recommend This Product!
|
|
"Love this mold!" |
|
COMMENTS: I've switched from using plastic molds to using this silicone mold exclusively. The soap unmolds easily and the score lines make it easy to cut uniform bars. This is the second one I purchased.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Nice size bars
• Easy to cut
• Makes 12 bars at a time
|
|
|
|
|
|
William • California
Date Submitted: 07/03/2014
I Recommend This Product!
|
|
"Love this!!!" |
|
COMMENTS: I have made my batches to fit this mold and it comes out great. I love the lines the mold puts in the soaps to help cut it after it hardens.
|
|
PRODUCT USED IN: Soap - Hot Process
|
|
|
|
|
Deborah • Barbados
Date Submitted: 05/29/2014
I Recommend This Product!
|
|
"Great Product" |
|
COMMENTS: This is a great mold for cp soap. Soap comes out easy, no issues.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Barbara • Washington
Date Submitted: 04/19/2014
I Recommend This Product!
|
|
"Perfect Bars" |
|
COMMENTS: Great mold for CP soap. Unmolds easily and makes nice size bars. Now if they would just use the same material for the square molds, I would be VERY happy.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Patricia • Pennsylvania
Date Submitted: 03/12/2014
I Recommend This Product!
|
|
"My go to mold!" |
|
COMMENTS: I recalculated my soap recipe to fit this mold and it works so well for my needs. I have two so I can do two batches in one day. The grooves mark a perfect sized bar, the soap comes out cleanly, and a quick clean up! I still use petroleum jelly to coat it to prevent sticking, but honestly have never tried it without. Love it!
|
|
PRODUCT USED IN: Soap - Cold Process
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• ease of use
• ease of cleanup
• grooves make a perfect sized bar!
|
|
|
|
|
|
Heidi • Wisconsin
Date Submitted: 02/19/2014
I Recommend This Product!
|
|
"Perfect Mold!" |
|
COMMENTS: Love this mold! Released the soap beautifully, well defined guides for uniform sized bars, sturdy construction and quick clean-up. Best mold I've used so far and reasonably priced.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Christen • Florida
Date Submitted: 10/11/2013
I Recommend This Product!
|
|
"12 Bar Mold" |
|
COMMENTS: GET THIS MOLD! I used this for MP at first - love the fact that it has little score lines so I know where to cut the soap. No bowing what so ever ...and I've used this mold over and over again. Held up well in CP soap but I did Need to add Sodium Lactate to make the soap easier to release...it was not hardening when I used it without the sodium lactate. The bars are a great hefty size...love this mold!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
|
|
|
|
|
Melissa • Pennsylvania
Date Submitted: 09/17/2013
I Recommend This Product!
|
|
"Awesome" |
|
COMMENTS: These make great bars of soap with M&P base. Easy to unmold too!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Emily • Maryland
Date Submitted: 09/17/2013
I Recommend This Product!
|
|
"Great mold" |
|
COMMENTS: Love this mold so much I had to buy a second after I wore off the coating on my old hand-me-down mold! I use a CP recipe that is a little slower to harden up so I stick the mold in the freezer for an hour or two prior to unmolding and get beautiful results. The grid makes it super easy to cut straight, even bars. Just make sure to set it on top of a sturdy piece of cardboard before filling, it is not rigid enough to move with raw soap in it! I find that 40oz of base oils yield bars that are ~4.25oz when fully cured and does not fill the mold to the top (no worries about overflow!).
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
Kristyn • Pennsylvania
Date Submitted: 09/15/2013
I Recommend This Product!
|
|
"Great mold" |
|
COMMENTS: This has held up well for us and makes cutting easy, I make 2-3 batches of hot process soap a week in each mold and have had them for over a year with no issues.
|
|
PRODUCT USED IN: Soap - Hot Process
|
|
|
|
|
Leanne • New Jersey
Date Submitted: 08/21/2013
I Recommend This Product!
|
|
"Love this mold and would love to own many" |
|
COMMENTS: When the soap sticks in the center, set oven for 200F and then shut off once it reaches temp, then set mold w soap in overnight. Soap should dry out enough to unmold by morning. Been there but it doesnt always stick with different soap recipes. Also, to change bar size, just change the recipe size 12 bars x 4 oz size each, for example, use 48 oz of oil soap recipe. If it weren't a pricey mold as most silicone molds are, I'd own many more of these.
|
|
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• ease of use
• lines on bottom for cutting
|
|
|
|
|
|
diane • New Mexico
Date Submitted: 08/19/2013
I Recommend This Product!
|
|
"Love it!" |
|
COMMENTS: Wish the loaf molds were made with this material. This is durable, easy to un-mold and a charm to work with!
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
Stephanie • Ohio
Date Submitted: 08/04/2013
I Recommend This Product!
|
|
"Can't Live Without These!" |
|
COMMENTS: I'll be honest, I am terrible at cutting my soaps evenly but this mold has saved my sanity! The score marks are wonderful to cut along, and I haven't had any issues with unmolding.
|
|
PRODUCT USED IN: Soap - Cold Process
|
|
|
|
|
elizabeth • Missouri
Date Submitted: 07/29/2013
I Recommend This Product!
|
|
"excellent" |
|
COMMENTS: makes large batches much more time effective and uniform
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
|
|
|
|
RONNELL • Louisiana
Date Submitted: 07/29/2013
I Recommend This Product!
|
|
"Excellent slab mold" |
|
COMMENTS: I usually use individual silicone molds but was looking for a mold that would make my bars come out about the same. I ended up loving it! Not only can I pour 12 similar bars at once, they have the cutting lines imprinted in them for fool-proof cutting! This mold can also be used for some of the fancier designs as well. I've done M&P, CP. & CPOP on this mold, its great!
|
|
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Ease of use
• Cutting line imprints
• being able to customize bar sizes
|
|
• Price
• More color choices
• Make it in additional sizes
|
|
|
|
Adi Mazal • Texas
Date Submitted: 07/16/2013
I Recommend This Product!
|
|
"Wonderful mold" |
|
COMMENTS: Great mold, easy to use, the cutting marks are clear and deep. The bar is beautiful.
We were looking for a mold that makes 5 oz bars, and this would make 6 oz bars if filled all the way.
It is a great mold so maybe worth changing to 6 oz ;)
Love it!
Pink is always a good idea ;)
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Clear marks
• easy to extract the soap
• beautiful large bars
|
|
• Mark the 5 oz limit
|
|
|
|
Mindi • Wisconsin
Date Submitted: 07/15/2013
I Recommend This Product!
|
|
"Love it" |
|
COMMENTS: I really love this silicone mold! It is so easy to use: pour soap in, let firm up, pop out of mold, cut on the score/indent marks and your done!
I am thinking of getting another one so I can have more drying at one time.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• Simple, easy to use
• Easily cut on indent lines
• Soap comes out of mold easily!
|
|
|
|
|
|
belinda • New Hampshire
Date Submitted: 07/09/2013
I Recommend This Product!
|
|
"Great Mold" |
|
COMMENTS: I only ordered one of these, but will be ordering more! This mold is wonderful and it's so easy to cut the soap in even bars.
I love crafters choice molds and they work over and over.
|
|
PRODUCT USED IN: Soap - Melt & Pour
|
| THINGS I LIKE |
|
THINGS I'D LIKE TO CHANGE |
• easy to use
• made very well
|
|
|
|
|
| Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information. |
 |
15 Question(s) Shown Below |
| Distributor & Drop Shipper Minimum Advertised Pricing |
As a Crafter’s Choice Distributor and/or Drop Shipper you have agreed to abide by the following Minimum Advertised Price (MAP) for each product and price level. You are permitted to advertise products at a higher price. You may not advertise the products at a lower price. Below you will find the MAP for this product.
|
|
|
|
|
